What is the most common angle grinder injury? Most angle grinder injuries are from metal particles lodging in the operator’s eye. However, the most serious injuries are from kick-back, where the disc is thrust back violently towards the operator. Angle grinders used with cutting discs expose workers to a range of severe additional hazards.
What is the largest contributor to accidents involving abrasive wheels? A lack of training is one of the leading causes for injury when operating abrasive wheels. Severe injuries can have a massive impact on the employee’s life, affecting them both mentally and physically.
What are the common causes of grinding accidents?
What are most angle grinder injuries from?
- Higher than recommended operational speeds.
- Wheel Guard Removal.
- Proper PPE.
- Loose articles/clothing/hair.
- Wheel Guard positioning.
- Appropriate position of the body with regards to tool and wheel guard.
- Angle Grinder Kickback.
- Wheel damage.
What types of injuries could occur using an angle grinder? Serious incidents can occur when cutting and grinding discs are fitted onto hand-held power and air tools. Common injuries include amputated fingers, severed tendons and deep cuts to the face, upper body or legs.
What is the most common angle grinder injury? – Additional Questions
Does OSHA require guards on grinders?
Portable grinding tools must be equipped with safety guards to protect workers not only from the moving wheel surface, but also from flying fragments in case of wheel breakage.
Are 9 inch grinders illegal?
Note: 9 inch (230 mm) angle grinders have been banned on some work sites due to the increased risk of injury. The increased power and size of the unit will cause more severe kickback and gyroscopic effects (i.e. makes the grinder difficult to manoeuvre).
What are the hazards in grinding?
When operating, the cutting or grinding disc may come into contact with a body part, or shatter and throw off pieces at extremely high speed. An operator could easily sustain cuts, abrasions, burns or eye injuries.
What are the hazards of grinding metal?
Dust in particular, such as that caused by aluminum grinding, can be inhaled and cause damage to internal organs at a nearly microscopic level. Fire/Explosion Risks: The aforementioned dust can create an explosion risk given the right conditions, such as when it is exposed to flames or sparks.
What is the most common mechanical equipment injuries?
The most common mechanical equipment injuries are to hands and fingers, which may be cut, sprained, dislocated, broken, crushed or cut off by machinery or tools. Eye injuries can be caused by heat or radiation or by objects thrown from moving mechanical parts.
What are the dangers of using excessive force on the disc when using an angle grinder?
Hazards
- Entanglement with turning wheel or disc.
- Projectiles.
- Contact with uncontrolled grinder.
- Noise.
- Electrical current.
- Sparks & hot metal.
- Fumes & toxic dust.
- Slips, trips & falls.
Should I wear gloves when grinding?
Never wear gloves with grinders. Or operate grinders with guards removed. By “grinders,” we mean abrasive belt grinders, bench grinders, pedestal grinders, surface grinders, and also abrasive cutoff machines. No Gloves!
How long can I use an angle grinder for?
Even if it appears that nothing has changed, you should not leave it for more than about two years without checking whether a review is needed.
What PPE is required for grinding?
Wear safety glasses or goggles, or a face shield (with safety glasses or goggles) to protect against flying particles. Gloves, aprons, metatarsal safety boots, hearing protection, and respiratory protection may be required, depending on the work. Ensure the floor around the work area is clean.
What should you not do with a grinder?
Never use an abrasive tool that has a lower recommended RPM than your angle grinder is capable of spinning at. The abrasive discs are designed to work only up to the recommended speeds. You risk destroying the discs when used at higher speeds that also causes more force/pressure than the disc can safely handle.
Is the grinder safe?
Because grinders run at such high RPM, wheels actually explode when they break, causing very serious injuries, blindness and even death. In addition, the distance between the grinding wheel and the adjustable tongue-guard — also known as a “spark arrestor” — must never exceed 1/4-inch.
Is abrasive wheel training a legal requirement?
What is Abrasive Wheels training and who needs it? Abrasive Wheels training is a legal requirement for anyone operating this equipment in the workplace. Abrasive Wheels are extremely dangerous and the only way to reduce risk is through theoretical and practical training in operating the machinery.
What is the main safety risk associated with abrasive wheels?
When in use, abrasive wheels can create sparks. This has the potential to lead to fires or even explosions if their surroundings aren’t keep clean and ventilated. In order to protect against this, it is the duty of both the employer and those using the wheels to ensure clean, well-ventilated working environment.
Do you need to be trained to use a grinder?
Thanks to the Provision and Use of Work Equipment Regulations (PUWER 98), everyone who uses an angle grinder, petrol-driven saw or bench grinder for work needs to be properly trained to do so. That means there has been a surge in the number of farmers and farm workers booking on to abrasive wheel courses.
What does the letter D mean on abrasive wheel?
First letter = abrasive material. A= Aluminum Oxide (usually metal) S- Silicone Carbine (usually masonry) C- Ceramic. D- Diamond.
What is a pink grinding wheel used for?
The 80 Grit Pink Wheel is specifically designed for the high stainless steel blades used on hockey player skates. These grinding wheels come standard on all new machines, and are recommended for sharpening hockey player skates. All Wissota grinding wheels are hand balanced and side finished to remove any wobble.